Overview of the DIY Water and Juice Dispenser
The DIY water and juice dispenser is an automated system that is designed to dispense water and juice with the help of Arduino and NEX Chan touch Music display. This system is powered by a DC power jack and is equipped with two 12Vt relays. The system also includes male and female HR pins, resistors, transistors, two terminal blocks, a 5mm red color LED, 47 diodes, a 100 microfarad capacitor, and a 5Vt voltage regulator with a heat sink and screw.
How the DIY Water and Juice Dispenser Works
The Arduino Nano 31 km is the main component of the DIY water and juice dispenser. It is responsible for controlling the system and sending commands to the NEX Chan touch Music display. The NEX Chan touch Music display is responsible for displaying the user interface and providing feedback to the Arduino Nano 31 km. The Arduino Nano 31 km is also responsible for controlling the two 12Vt relays, which are responsible for controlling the flow of water and juice. The resistors, transistors, two terminal blocks, a 5mm red color LED, 47 diodes, a 100 microfarad capacitor, and a 5Vt voltage regulator with a heat sink and screw are responsible for regulating the flow of electricity and ensuring the system is safe to use.
Benefits of the DIY Water and Juice Dispenser
The DIY water and juice dispenser offers a number of benefits. Firstly, it is easy to use and requires minimal maintenance. Secondly, it is cost-effective and can be built with readily available components. Thirdly, it is powered by a DC power jack, making it energy-efficient. Finally, the system is equipped with two 12Vt relays, which ensure that the flow of water and juice is regulated and safe to use.
Overview of DIY Water and Juice Dispenser
The DIY Water and Juice Dispenser is a project that utilizes Arduino and Nextion technology to create a convenient and efficient way to dispense both water and juice. This project is ideal for those looking to create a unique and practical device for their home or office. The dispenser is composed of several components, including a control board PCB, two flow sensors, two 12vt diaphragm water pumps, four rubber brackets, a piece of pipe, a 4.3 in intelligent series Nextion display, two 3D printed pipe holders, and pieces of cardboard.
Building the Dispenser
The first step in building the dispenser is to solder all the components to the control board PCB. It is important to ensure that the Arduino is properly connected to the control board, as failure to do so can result in the code not uploading properly. Once the components are soldered, the next step is to collect all the materials needed to complete the dispenser. This includes the flow sensors, pumps, brackets, pipe, Nextion display, pipe holders, and cardboard.
Creating the Casing
The casing of the dispenser can be created using the pieces of cardboard. The cardboard can be cut and shaped to fit the components of the dispenser. Alternatively, the casing can be created using plastic, wood, or stainless steel sheets. Once the casing is complete, the components can be placed inside and secured with the four rubber brackets.
Connecting the Components
The next step is to connect the components to the control board PCB. This includes connecting the flow sensors, pumps, and Nextion display. The flow sensors and pumps should be connected to the control board using the appropriate wiring. The Nextion display should be connected to the control board using the 3D printed frame.
Testing the Dispenser
Once all the components are connected, the dispenser is ready to be tested. The code should be uploaded to the Arduino and the dispenser should be powered on. The flow sensors should be tested to ensure they are working properly. The pumps should be tested to ensure they are dispensing the correct amount of water and juice. Once the dispenser is tested and working properly, it is ready to be used.
Overview of DIY Water and Juice Dispenser
Creating a DIY water and juice dispenser is a great way to save money and have a convenient source of refreshment. This project requires the use of Arduino and Nextion, two powerful and versatile tools for creating electronic devices. The project involves constructing a housing for the dispenser and connecting the necessary components. This includes a water pump, flow sensor, and output pipe. The housing is then covered with spray paint for a finished look.
Constructing the Dispenser Housing
The first step in constructing the DIY water and juice dispenser is to create the housing. This involves cutting two pieces of wood to the desired dimensions. The width of the pieces should be 5 inches and 8.5 inches respectively. The second piece should be A Little Less Than 3 inches wide and 8 inches long. The third piece should be 6 inches wide and 8.5 inches long. The fourth piece should be 9 inches long and have a bend at 3 inches from one side. The width of this piece should be 8 inches. The two pieces should then be connected with the help of pipe holders. The edges of the housing should be covered with paper tape before it is sprayed with paint.
Connecting the Components
The next step in constructing the DIY water and juice dispenser is to connect the necessary components. This includes the water pump, flow sensor, and output pipe. The water pump should be connected to a piece of cardboard with the help of four nut bolts. The flow sensor should be connected to the output pipe of the water pump, with the arrowhead pointing upwards. Once all the components are connected, the dispenser is ready to be used.
Benefits of DIY Water and Juice Dispenser
DIY water and juice dispensers offer numerous benefits. They are cost-effective, as they are made with readily available materials. They are also easy to maintain and can be customized to suit individual needs. Furthermore, they are convenient, as they provide a source of refreshment without having to leave the house. Finally, they are a great way to learn about electronics and Arduino programming.
Assembly of DIY Water and Juice Dispenser
The construction of a DIY water and juice dispenser requires the assembly of several components. Firstly, a stand is connected to the touch screen with the help of hot glue. Output pipes are then connected to the touch display. Wiring connections are then made between the water pumps, sensors, Nextion display and 12V input power connector. The first water pump and sensor are used for water, while the second pump and sensor are used for juice. The pipes are connected to the input of both pumps, with the first pipe going inside the water container and the second pipe going inside the juice container.
Burning Arduino Code and Uploading TFT File
The next step is to burn the Arduino code and upload the TFT file to the touch display. This process requires the use of an Arduino IDE, where the code is written and compiled. The compiled code is then uploaded to the Arduino board. The TFT file is uploaded to the touch display using a USB cable. This process is done to ensure that the touch display is functioning properly and that the Arduino board is able to communicate with the touch display.
Testing the DIY Water and Juice Dispenser
Once the code is uploaded and the TFT file is uploaded, the dispenser is ready for testing. The water and juice pumps are tested to ensure that they are working properly. The sensors are tested to ensure that they are accurately detecting the presence of water and juice. The touch display is tested to ensure that it is functioning properly and that it is able to communicate with the Arduino board. Once all of these tests are complete, the dispenser is ready for use.
Benefits of DIY Water and Juice Dispenser
The DIY water and juice dispenser offers several benefits. Firstly, it is a cost-effective solution for providing clean and safe drinking water and juice. Secondly, it is easy to assemble and requires minimal maintenance. Thirdly, it is a great project for students to learn about electronics and programming. Finally, it is a great way to introduce children to the world of robotics and automation.
Overview of DIY Water and Juice Dispenser
The DIY Water and Juice Dispenser is a project that utilizes Arduino and Nextion to create a user-friendly machine capable of dispensing both water and juice. The project is relatively simple and requires minimal coding and hardware setup. The Arduino code is used to control the flow sensors that are used to measure the amount of water and juice dispensed. The code also allows for calibration of each mode of each sensor, so that the machine can be adjusted to dispense the desired amount. Additionally, a touch interface is designed using Nextion Editor and a TFT file is generated and uploaded to the Nextion display.
Hardware Setup
The hardware setup for the DIY Water and Juice Dispenser consists of an Arduino board, two flow sensors, and a Nextion display. The Arduino board is connected to the flow sensors and the Nextion display, and the code is uploaded to the board. The flow sensors measure the amount of water and juice dispensed and the Nextion display is used to create a user-friendly touch interface.
Software Setup
The software setup for the DIY Water and Juice Dispenser consists of the Arduino code and the TFT file generated by the Nextion Editor. The Arduino code is used to control the flow sensors and calibrate each mode of each sensor. The TFT file is uploaded to the Nextion display and is used to create a user-friendly touch interface.
Working of the DIY Water and Juice Dispenser
When the machine is powered on, a welcome screen appears on the Nextion display. When the user presses the continue button, two menus appear – one for water and one for juice. When the user selects the water option, three options appear – small, medium, and large – that can be chosen according to the user’s requirements. Similarly, when the user selects the juice option, three options appear – small, medium, and large – that can be chosen according to the user’s requirements. The flow sensors measure the amount of water and juice dispensed and the machine dispenses the desired amount.
Overview of DIY Water and Juice Dispenser
A DIY water and juice dispenser is an innovative device that can be used to dispense a variety of liquids, such as water, juice, and other beverages. The device is powered by Arduino and Nextion, two popular open-source platforms. The device is capable of providing a range of options for users, allowing them to select the amount of liquid they wish to dispense. The device also features a start button and an okay button, which can be used to initiate and end the dispensing process.
How the DIY Water and Juice Dispenser Works
The DIY water and juice dispenser is a simple yet effective device. It consists of a main control unit, which is powered by Arduino and Nextion. The control unit is connected to a liquid reservoir, which is filled with the desired liquid. The control unit is also connected to a display, which can be used to select the amount of liquid to be dispensed. The display features a menu, which includes three options: water, juice, and other beverages.
Once the desired amount of liquid is selected, the user can press the start button to initiate the dispensing process. The liquid will then be dispensed into a cup or other container. When the filling is complete, the user can press the okay button to return to the initial screen.
Benefits of DIY Water and Juice Dispenser
The DIY water and juice dispenser offers a number of benefits for users. Firstly, it is a cost-effective solution, as it does not require any additional hardware or software. Secondly, it is easy to use and requires minimal setup. Thirdly, it is a safe and hygienic way to dispense liquids, as the user does not need to come into contact with the liquid. Finally, it is a convenient way to dispense liquids, as it can be used at any time and in any location.
The DIY water and juice dispenser is an automated system that is designed to dispense water and juice with the help of Arduino and NEX Chan touch Music display. It is easy to use and requires minimal maintenance, making it an ideal solution for those looking for a cost-effective and energy-efficient way to dispense water and juice.
The DIY Water and Juice Dispenser is a great project for those looking to create a convenient and efficient way to dispense both water and juice. The project requires the use of several components, including a control board PCB, two flow sensors, two 12vt diaphragm water pumps, four rubber brackets, a piece of pipe, a 4.3 in intelligent series Nextion display, two 3D printed pipe holders, and pieces of cardboard. The components should be soldered to the control board PCB and the casing should be created using the pieces of cardboard. Once the components are connected and the code is uploaded, the dispenser is ready to be tested and used.
The DIY water and juice dispenser is a simple yet effective device that can be used to dispense a variety of liquids. It is powered by Arduino and Nextion, two popular open-source platforms. The device is capable of providing a range of options for users, allowing them to select the amount of liquid they wish to dispense. The device also features a start button and an okay button, which can be used to initiate and end the dispensing process. The device offers a number of benefits, including cost-effectiveness, ease of use, safety, and convenience.