arduino pinmode

    Several jumper wires, a push button. An LED and a corresponding resistor, in my case, it’s a 120 ohm, so without any further delay, let’s get started, so the Arduino itself has 13 pins which are capable of doing digital inputs and outputs. They are located up here, along with the ground and […]

arduino ide windows

    And today, we’re gon na, be talking about how to get started with the ESP8266 development board. We’re gon na be using the Arduino IDE to write custom firmware that is gon na, be downloaded onto the board and execute. The Materials that we’re gon na need for this tutorial are the development […]

arduino for mac

    And today, we’re gon na, be talking about how to get started with the ESP8266 development board. We’re gon na be using the Arduino IDE to write custom firmware that is gon na, be downloaded onto the board and execute. The Materials that we’re gon na need for this tutorial are the development […]

arduino 2 inputs 2 outputs

    Several jumper wires, a push button. An LED and a corresponding resistor, in my case, it’s a 120 ohm, so without any further delay, let’s get started, so the Arduino itself has 13 pins which are capable of doing digital inputs and outputs. They are located up here, along with the ground and […]

arduino keyboard input

    The same interface nowadays seems like everything uses USB. It would be nice to use some of these devices with my electronics projects. The chip on my Arduino board could be used to output USB data. It can act as a USB device, but to receive USB data. It needs to act as […]

arduino digitalread

    Several jumper wires, a push button. An LED and a corresponding resistor, in my case, it’s a 120 ohm, so without any further delay, let’s get started, so the Arduino itself has 13 pins which are capable of doing digital inputs and outputs. They are located up here, along with the ground and […]

arduino gps speedometer

    What this is so this big old mess of stuff here is actually functioning as a GPS tracker, so there’s two parts to it. You just have to read in the current location using the GPS, and then you use the sim module or the some module to send that to a web […]

arduino button wiring

    Several jumper wires, a push button. An LED and a corresponding resistor, in my case, it’s a 120 ohm, so without any further delay, let’s get started, so the Arduino itself has 13 pins which are capable of doing digital inputs and outputs. They are located up here, along with the ground and […]