arduino yun web server

 


 
Leonardo and it’s got an ethros linux processor on board, with built in Wi Fi, so it acts as both a leonardo and a Wi Fi linux board as well. You get the power of both in one when you first plug it into your machine. The union will show up to your network as a Wi Fi hotspot, so you can go to your Wi Fi list and it should show up pretty quickly thereafter in the list. You can see it right here, I’m going to connect to it and once I get a successful connection, I’m going to go to a browser and I’m going to type in Arduino dot, local. That will connect you to the configuration page for your UN once you’re there. The initial password is just Arduino all lowercase and once you’re logged in you get to the configuration screen, it gives you the basic stats of your board. You’Ve got the Wi Fi address and the net mask in the configuration and also the wired connection, hit the configure button and you can change all of the configuration. The first thing you might want to do is give it your own name, something like my Ewing and then give it a password which has to be at least 8 characters, long confirm the password and then pick the timezone. You want to pick the timezone so that when the Union connects to the network, it will set the time correctly for your timezone, so I’m going to set it for America New York, because that’s, where I live and then I’m going to configure a wireless network in The next section, the list of Wi Fi networks around you will automatically populate on this list, and so you can just pick your home network in my case tygo net automatically, and you can see that the security type gets set automatically as well.

Then all you have to do is enter the password for your personal network. After that, hit configure and restart the union will then reset itself an attempt to connect to your home network, while you’re waiting for it to reset, because what’s happening is that the Linux operating system is rebooting on the board. You want to go back to your Wi Fi connection and connect back to your home network as usual. That way, when the Union is finished, booting up you’ll be able to see it on your home network. Once the unions restarted, you’ll get a message that it’s, restarted and you’ll get a link to its address on your local network, which is typically the name that you gave at dot local again you’re back at the configuration screen so enter the password that you gave it Just a minute ago and you’re back at the configuration screen, except now you can see that your device is. Your Union is connected to the Wi Fi network, which is great. Now you want to configure the arduino side so open up arduino 1.5 point for or later and we’re going to go to the examples and we’re going to look for a new library called bridge bridge is a tool that lets you communicate between the arduino side and The linux side very easily, and the first example we’re going to look at is one called Wi Fi status now there’s a serial connection between the two processors.

Just like you have serial communication between a microcontroller and any Arduino microcontroller and a desktop computer and what’s happening is when you make a connection using bridge let’s open this little larger so that you can see the whole sketch your connection using the bridge. Library is a lot like the serial connection. The first thing you’re going to do is you’re going to do bridge begin your set up and that’s going to open the connection between the two then once you’re connected you’re going to set up a process, a process is just one particular instance of bridge. In this case, what we’re going to do with our process is we’re going to run a shell command like we’re sitting on the Linux command line, there’s a built in one in the Union that will print out the Wi Fi info. So this sketch will simply run that shell command and send the data back to us over the serial connection. Since it’s a serial connection, it’s got all the usual things we expect from serial. We can see how many bytes are available to read. We can read those bytes and, of course we can print or print line them as well. So let’s pick our union from our Tools menu just like usual we’re looking for the Arduino Union and our port will be that serial port and then we’re going to upload to the board once you’re uploaded. You can open the serial monitor and after it gets started.

You see to your sketch printout your Wi Fi status, so you know whether you’re connected or not there we go there’s the full Wi Fi connection. You can see I’m connected to my network hub tygo net. You can see there’s my IP address, my MAC address and in the loop you can see it’s going to continue printing out the signal, strength, how many bytes have been passed back and forth and so forth. So there’s our first connection from the Union to the network and that’s great, might be fun if we could actually connect to an external page like a web page. So let’s look at another example here this time, we’re going to go to the bridge examples and we’re going to look at the HTTP client. What this allows us to do is make a connection just as if we were a browser to any web site. So as soon as the sketch is open here, we go you’ll see it in action. Now you can see that again, we’re using bridge and once bridge is open. We’Re going to use the HTTP, client class and we’re going to say, client get and we’re going to give it a URL. This URL is for a special page on the Arduino site in case you’ve, never seen it let’s just go and take a look at it here in a new tab once it loads up. We should see your Arduino logo in ASCII yay, okay, so once we upload this to our union, we can open up the serial, monitor and we’ll, see that the sketch will run and do the connection to the web and get the web page like as it was In a browser, so there you go, you’ve got a very simple introduction to the Arduino Union and a couple of the sketches that come with it.

 
 

arduino yun web server Video

 

 

 

 

 

 

arduino yun web server news

 

 

 

 

 

 

 

arduino yun web server Social

 

 

 

 

official.arduino
2019-09-13T20:23:14+0000

See the world through the eyes of this camera-equipped, snake-like robot.
safe image.php?d=AQB2kdm3zOD71KQX&w=720&h=720&url=https%3A%2F%2Fblog.arduino.cc%2Fwp content%2Fuploads%2F2019%2F09%2FUntitled 2 3 - arduino yun web server
official.arduino
2019-09-13T16:58:23+0000

This 3D-printed prosthesis uses computer vision to adjust its grip depending on the object.
safe image.php?d=AQD dQbotzfS6mLl&w=720&h=720&url=fbstaging%3A%2F%2Fgraph.facebook - arduino yun web server

 

 

(Visited 49 times, 1 visits today)

About The Author

You might be interested in

Comment (33)

  1. I own two uno’s and one Mega 2560 but my computers do not want them to work as they keep saying Runtime error returns 3 this application has asked to terminate in an unusual manner. Lenovo and Toshiba both same thing but some times I can get a program to run by using my browser and codebender but computer trys to block the port at times. I am just wanting to know what I do to put this right 1.5.4r2 will not install even thought 1.5.4 has been uninstalled so something is wrong.

  2. Hi, today i receive my YUN and see u tutorial. It-s ok since the open a Serial Monitor. At this point i see only message from YUN : Impossibile connettersi: riprovo… (1)… connesso! …. But i don’t see a page at link : http://arduino.cc/asciilogo.txt.  WHY ?

  3. I saw the yún and kind of laughed. Yún is mandarin for cloud (at least i’m pretty sure that’s what it’s relating to)  because of the tonal marker on the u, we know it’s the second tone, so it starts from the middle and rises. The character for this is 云 😀 odd little fact about the name for the new arduino + linux board. I wonder why they chose cloud, and in mandarin chinese of all things? lol

    1. I think it’s designed to be part of the “Cloud”/Internet of things that we are starting to rely on…

      Cool fact though!

    1. No, you don’t need linux on your comp. You just use BASIC to write code and you can use BASIC in windows. Leonardo(linux) is already installed on the arduino. Does that answer your question?

    2. @OnePiece0039 To use the WiFi, USB, Web server… pretty much a whole heap of features a normal mirocontroller wouldn’t be able to handle.

  4. after configuring and selecting my home network.. myyun.local is not loading.. + wi fi status is coming but http client example logo not coming…please help

    1. yes in chrome ..then try firefox and see if its a browser thing..
      ensure you update browsers ..to latest vers

  5. Hello, guys
    i just bought an arduino yun and succeeded in making it connect with my wifi as it  was shone in the instructions but when i choose an example bridge and choose one of the options the port gives me my ip address and my baud (300) but it is not the same as in the instruction video (9600) and when i click the serial monitor button it shows me this
    Unable to connect: retrying (1)…
    Unable to connect: retrying (2)…
    Unable to connect: retrying (3)…
    Unable to connect: retrying (4)…
    Unable to connect: is the sketch using the bridge?

  6. Requires the obsolete & unsupported Java6. Apple & Oracle neither have Java 6 in their archives.  The Arduino installer needs to be updated to be usable on a current Mac.

  7. hiii
    i recently brought a yun board which has built in Ethernet and WiFi facility. My doubt is can we dump the code through the wifi module and use the Ethernet module for connecting it to non arduino embedded board with Ethernet facility  
    please reply at the earliest…

  8. Do you know why my arduino would not configure and restart when i try and connect it to my home wifi?

    BTW NYC UNITE

  9. what signal strength is that? the strength between the yun and the router? or the yun and the computer you are using?

    1. +Rosevir Ceballos Jr. when i using yun, i had a lot of trouble due to signal strength. A lot of issues really. I couldnt be very far from it.

  10. Hi, i have problem to connect my Arduino Yun, already it appears as the following name

    Linino-B4218AF03692 in the list of networks, and not “Arduino Yun…”
    as i saw in several examples, and i want log in, it told me that
    password is not correct, and i must delete “coockies” ,i did it and it
    changed nothing, the password which i did is “arduino” , should i make
    another one? as the password which we have behind our modem or it is
    realy a problem of coockies in my laptop?

  11. Just got a Yun for Christmas! I’m not sure what I’m doing wrong but I cant find its network when I plug it in… Anyways, hope it works. 😀

  12. Just to clarify, is the Desktop PC only connected to the Yun via Wi-Fi? Or also via USB?
    Is the Serial Monitor recieving data from the Yun wirelessly and are you sending new Sketches wirelessly?

LEAVE YOUR COMMENT

Your email address will not be published. Required fields are marked *