arduino yun tutorial


Also in combination with the ideas: 31 32. Real time clock module. We will make a data logging example where we will store the data of a temperature sensor to the SD card and import it into Excel to make a chart out of it. But first let’s take a look at the SD card module. It works with a standard micro SD card switch operating voltage is 3.3 volts. Therefore, the module has a voltage regulator and a level shifter so that we can use it with the 5 volts pin of the Arduino board. This is the card. Module have 6 PS for powering the module, the VCC in the ground, pins and 4 more pins for the SPI communication here’s. How we need to connect it to the Arduino board, note that each Arduino board have different SPI pins, which should be connected accordingly. Next, we need to program the Arduino here’s a simple code, so first we need to include the standard. Sdn SPI libraries create a file object and define the chip select, pin of the SPI bus. The pin 53 in my case for the Arduino mega board. For this example, we want our code to be executed only once so. All the code will be placed in the setup section while the loop section will remain empty. So first we need to start the serial communication and define the chip select, pin as output. We have to do this because the chip select pin needs to be low so that the SPI communication between the module and the Arduino works.

Next, using the SD begin function, we will initialize the SD card and if the initialization has been successful, the if statement will become true and the string SD card is ready to use will be printed on the serial monitor else. The string SD card initialization field will be printed and also the program will be terminated. Next, using the SD dot open function, we will create a new file named test2 X, T, including the file underscore right argument, meaning that we can both read and write to the file. If the file already exists, D, SD dot, open function will just open it. So if the file has been successfully created first, we will print the string writing to file on the serial monitor and then using the my file dot println function. We will print the text testing text one two three into the file. After that, we need to use the close function to ensure that the previous data written to the file is physically saved to the SD card. Next, we will see how we can read from the file. So again we will use the same function, SD, dot, open, but this time as the file test, dot txt has already been created. The function will just open the file. Then, using the my file dot read function, we will read from the file and print it on the serial monitor the read function actually reads just one character at a time. So, therefore, we need to use the while loop and function my file dot available to read all characters or the whole previously written data.

At the end, we also need to close the file now after uploading, the code to the Arduino. If everything is OK, the following will appear on the serial monitor. As we can see, the SD card has been successfully initialized. The writing to it has been successful as well and also reading the written data or the string testing text. One two three has been successfully read: if we open the SD card on our computer, we can see the created test, dot, txt file and the written text in it. So that’s the basic working principle of the SD card module and now let’s make another more interesting. Example of data logging temperature sensor. For that purpose, we will use the DES 31 32 real time clock module, which has a built in temperature sensor as well. You can find more details about how to connect and use this module in my previous tutorial. So, after connecting the two modules to the Arduino let’s, take a look at the code for this example. First, we need to include the libraries needed for both modules, then create the two objects and in the setup section initialize them. In the loop section, using the serial dot print function, we will print the time and the temperature values on the serial monitor with a comma character between them and a new line after the temperature value. We need this form of the lines so that we can easily import them and make a chart in Excel.

Also note that the temperature values are converted into integers, so these same values will also be written into the newly created test, dot, txt file and, at the end we just need to add a delay which will represent the interval of recording the temperature data. After uploading. The code, the Arduino, will start storing the temperature values each three seconds after a while, we can open the SD card on our computer to see the results for creating a chart in Excel. We need to import this file and here’s how we will do that from the data menu. We need to click, get data from text button and select the text file. Here we will choose the limited and click Next and, in the second step, select the comma as the limiter and then finish the wizard. So this process will insert the time and the temperature values in two separate columns. Now we just need to select both columns and from the insert menu select insert line chart. This will create the chart where we can see the temperature values each three seconds that’s all for this tutorial, thanks for watching and for more tutorials and projects visit.


arduino yun tutorial Video







arduino yun tutorial news








arduino yun tutorial Social






See the world through the eyes of this camera-equipped, snake-like robot.
safe image.php?d=AQB2kdm3zOD71KQX&w=720&h=720& content%2Fuploads%2F2019%2F09%2FUntitled 2 3 - arduino yun tutorial

This 3D-printed prosthesis uses computer vision to adjust its grip depending on the object.
safe image.php?d=AQD dQbotzfS6mLl&w=720&h=720&url=fbstaging%3A%2F%2Fgraph.facebook - arduino yun tutorial
BdEwNHYO normal - arduino yun tutorial
Mon Feb 06 18:15:33 +0000 2017

Primeros pasos con Arduino YUN – Proyectos Arduino


tronixstuff photo


tronixstuff photo









(Visited 21 times, 1 visits today)

About The Author

You might be interested in

Comment (22)

  1. Hello , thanks for useful videos. I have a question. If I want to measure and log the magnetic field of a device over long period of time is it viable to use same configuration u have presented and just replace temperature sensor with magnetic flux density sensor?

  2. I am making a project where i use data logging module like this one and a soil himidity hygrometer. Is it possible to data log only if my system detects certain levels of moisture?

  3. dear sir, i have a question if you would help me. can we calculate the area under the graph in excel or matlab?

  4. Best video yet ! BUT how do I hook this up on a Node MCU? Everything I need SD / temp / temp PLEASE I hope someone can chime in for the NodeMCU side thanks in advance and we need a display on this! Lol

  5. Hello Dear
    how can i conect the SD-shield with arduino due? can you help me please
    i find the pins 4,1,3,- in the datasheet but i still didnt know how to conect them with the shield


  6. My project is to save the time when something turns on and the time when it turns off
    And save it on sd card
    Please help me if u can

  7. tis tutorial really helps, i’m planning on logging the voltage of some solarpanels and never really understood the sd card tutorials 😀

  8. hye..can u help me how to create a log on arduino with fingerprint sensor..i want to store all fingerprint data to create a fingerprint user log


Your email address will not be published. Required fields are marked *