arduino oled 128×64
I am going to show you my favorite displays for Arduino. Without any further delay lets get started, Hey guys, I am Nick and welcome to educ8s.tv a channel that is all about DIY electronics. Projects.. I have been uploading YouTube videos about Arduino for the last 2 years and in that time I have tested many displays. From the smaller and most inexpensive to the larger and most expensive, like this 60 E Paper display.. I have reviewed all these displays in this channel and I have built projects with most of them.. I will post the video reviews of all the displays in links in the description of the video below., Since I am getting a lot of questions from the viewers of the channel about which display to use in their projects. I thought that it would be a good idea to prepare a video about this subject. In this video. I will show my 5 favorite displays for Arduino.. I have also posted a detailed article on the same subject on my website at this link.. This article will be updated constantly, as I try more displays.. So lets start with my top 5 displays for Arduino.. This is the 3.5 Color TFT display with ILI9481 driver.. It is a very big display and it offers an impressive resolution, 480×320 pixels and it can display 65.000 colors. It comes as shield, so it is extremely easy to connect with Arduino.. It works with the Arduino Uno and the Arduino Mega.
. Unfortunately, it does not work with the faster Arduino Due.. The display also offers an SD card slot at the back, so we can use it to store data and images.. The price of this display is around 11.. The biggest disadvantage of the display is its speed., Since it offers a big resolution. The 8bit Arduinos struggle to drive it. Forget animation on this display. Displaying and updating text is ok, but bitmaps need time.. In conclusion, this display is a very easy to use display and it is ideal for beginners.. Additionally, you can use this display if you want to add a big display in your project.. If fast, refresh rate is not a requirement of your project, this display is a great display to use. Next in my list is the 0.96 monochrome OLED display.. It offers a resolution of 128×64 pixels.. I love this display. It is one of the easiest displays to use with Arduino.. It uses the I2C interface, so we only have to connect 2 wires to make it work., Since it uses the OLED technology. This display is very bright. It has a great contrast and it has a low power consumption.. The cost of the display is around 6.. I have used this display a lot in the past in many projects.. The only disadvantage of this display is that it is very small, but small size may be a requirement in some project.. To sum up, this is a great little display ideal for small handheld projects and an easy display to start with.
. Third, in my list is the 1.8 Color TFT display with the ST7735 driver.. This was the first color display to use with Arduino and the color display. I use the most.. It is inexpensive. It costs around 6. It has a resolution of 160×128 pixels. It can display 65.000 colors, it offers and SD card slot at the back, and it has a great library support.. It works on every Arduino. It works on Teensy and with the ESP8266 boards. What else to ask about A great display In the second place in my list is the 0.96 Color OLED display.. It is a new display on the market and it costs around 11.. It also uses the OLED technology, so it is very bright. It has a great contrast and a low power consumption.. On the other hand, the display is small and it offers a small resolution. Only 96×64 pixels.. It uses the SPI interface, so we need 8 wires in order to connect it with Arduino.. It works fine with the ESP8266 as well.. I think this display is ideal for handheld projects that require color.. Since the display is very new to the market. I think the price of it will go down soon, so it will be much more attractive. By far my favorite display for Arduino is the Nokia 5110 LCD display.. This display is inexpensive, it costs around 3 or 4. It is very easy to use. It has a great library support.
It is the only display that it is visible under direct sunlight and it has an extremely low power consumption. When the display is on. It only needs 0.4mA of current. I have already built a project with this display that can run on batteries with the display on for over a year. I have used this display a lot in the past and I am sure I am going to use it a lot in the future. Thats. Why? I bought a lot of them in case I cant buy them anymore.. The only disadvantages of this display is the low resolution which is 84×48 pixels and that it does not offer color.. To sum up, this display is by far my favorite display for Arduino and the only one to use if you need your projects to be battery powered.. This is my personal opinion about the best displays for Arduino.. Of course, since each person has different needs, you may have a different favorite display.. I would love to hear about your favorite displays in the comment section below.. Are there any good displays? I am missing. I would love to try them Before we go, since this is the last day of the year. I would like to wish you all a happy new year. May the New Year bring good health and prosperity to you and your loved ones. I would also like to thank for your fantastic support and your wonderful messages. They really mean a lot to me.
Thank you again, have a great New Year and see you next year. If this is your first time here, I would love to have you subscribed. In this channel. I post videos about DIY projects every Saturday., I love making things, and I believe that anyone can make things anyone can become a maker. Thats. Why I created this channel in order to share my knowledge with the community and learn from the community.? I hope you will join us. Until next Saturday Watch Learn Build Translating these subtitles.
arduino oled 128×64 Video
arduino oled 128×64 news
Man creates world’s smallest working “ThinkPad”, complete with stunning 64p OLED display, TrackPoint, and 20Mhz CPU – Notebookcheck.net
Posted on Monday July 29, 2019Man creates world’s smallest working “ThinkPad”, complete with stunning 64p OLED display, TrackPoint, and 20Mhz CPU Notebookcheck.net … Continue Reading »
Posted on Tuesday May 08, 2018Push It To The Limit: SSD1306 At 150 FPS Hackaday … Continue Reading »
Posted on Thursday November 01, 2018Drawing On An OLED With An ATtiny85, No RAM Buffers Allowed Hackaday … Continue Reading »
arduino oled 128×64 Social
🔬 Now that you’ve gotten your feet wet, dive into the kit and enjoy all nine experiments. Order yours today: http://bit.ly/2MnQ7fr
Originally posted 2017-09-09 16:11:28.